Heute, 07:08 - preAlpha dreamWifiLight (Mi-Light like Philips Hue über Boblight steuern) (pierrecinema)
tolles projekt
ich habe 4 milight plus ein atmolight. ich werde es am weekend testen
hier nochein guter link zu materie und den lampen http://www.msxfaq.de/lync/impresence/iwylight.htm
habe alles wie im ersten post und die milight.config uîm usr/dreamwifilight order. leider wird kein log und keine test.py erstellt, wie muss ich diese erstellen? mmit einem editor?
danke und gruss
root@dm8000:~# /etc/init.d/boblight-control start
Checking for boblight pids...
Start boblight...
Boblight-enigma2 already running with PID 24359, Stop..
Checking if Boblightd is running: Boblightd is not running! starting deamon....
Boblight Daemon - for enigma2 0.8r6 (c) 2012-2013 Speedy1985 and Oktay Oeztueter)
Boblight-enigma2 already running with PID 24359 Stopping...
Starting boblight-enigma2...
Boblight Client - for Enigma2 0.8r6 (c) 2013 Speedy1985 and Oktay Oeztueter <http://www.boblightenigma2.net>
root@dm8000:~# boblightd
Boblight Daemon - for enigma2 0.8r6 (c) 2012-2013 Speedy1985 and Oktay Oeztueter)
(InitLog) start of log /home/root/.boblight/boblightd.log
(PrintFlags) starting boblightd
(CConfig::LoadConfigFromFile) opening /etc/boblight.conf
(CConfig::CheckConfig) checking config lines
(CConfig::CheckConfig) config lines valid
(CConfig::BuildConfig) building config
(CConfig::BuildConfig) built config successfully
(main) Starting devices
(CDevice::Process) WifiLed: starting with output "python /usr/dreamWifiLight/Test.py"
(CDevice::Process) WifiLed: setting up
(CDevice::Process) ambilight: starting with output "/dev/ttyUSB0"
(CClientsHandler::Process) opening listening socket on *:19333
(CDevice::Process) WifiLed: setup succeeded
(CClientsHandler::Process) ERROR: bind() *:19333 Address already in use
(CDevice::Process) ambilight: setting up
(CDeviceRS232::OpenSerialPort) ERROR: ambilight: /dev/ttyUSB0: open() No such file or directory
(CDevice::Process) ERROR: ambilight: setting up failed, retrying in 10 seconds
python: can't open file '/usr/dreamWifiLight/Test.py': No such file or directory [zum Beitrag]
tolles projekt
ich habe 4 milight plus ein atmolight. ich werde es am weekend testen
hier nochein guter link zu materie und den lampen http://www.msxfaq.de/lync/impresence/iwylight.htm
habe alles wie im ersten post und die milight.config uîm usr/dreamwifilight order. leider wird kein log und keine test.py erstellt, wie muss ich diese erstellen? mmit einem editor?
danke und gruss
root@dm8000:~# /etc/init.d/boblight-control start
Checking for boblight pids...
Start boblight...
Boblight-enigma2 already running with PID 24359, Stop..
Checking if Boblightd is running: Boblightd is not running! starting deamon....
Boblight Daemon - for enigma2 0.8r6 (c) 2012-2013 Speedy1985 and Oktay Oeztueter)
Boblight-enigma2 already running with PID 24359 Stopping...
Starting boblight-enigma2...
Boblight Client - for Enigma2 0.8r6 (c) 2013 Speedy1985 and Oktay Oeztueter <http://www.boblightenigma2.net>
root@dm8000:~# boblightd
Boblight Daemon - for enigma2 0.8r6 (c) 2012-2013 Speedy1985 and Oktay Oeztueter)
(InitLog) start of log /home/root/.boblight/boblightd.log
(PrintFlags) starting boblightd
(CConfig::LoadConfigFromFile) opening /etc/boblight.conf
(CConfig::CheckConfig) checking config lines
(CConfig::CheckConfig) config lines valid
(CConfig::BuildConfig) building config
(CConfig::BuildConfig) built config successfully
(main) Starting devices
(CDevice::Process) WifiLed: starting with output "python /usr/dreamWifiLight/Test.py"
(CDevice::Process) WifiLed: setting up
(CDevice::Process) ambilight: starting with output "/dev/ttyUSB0"
(CClientsHandler::Process) opening listening socket on *:19333
(CDevice::Process) WifiLed: setup succeeded
(CClientsHandler::Process) ERROR: bind() *:19333 Address already in use
(CDevice::Process) ambilight: setting up
(CDeviceRS232::OpenSerialPort) ERROR: ambilight: /dev/ttyUSB0: open() No such file or directory
(CDevice::Process) ERROR: ambilight: setting up failed, retrying in 10 seconds
python: can't open file '/usr/dreamWifiLight/Test.py': No such file or directory [zum Beitrag]